30 Position 15 mL Tube Carrier, Compatible with Tecan Freedom EVO

Name: LabTechSurplus LTS-TEC-TUB30 30-Position 15 mL Tube Carrier
Brand: LabTechSurplus
SKU: LTS-TEC-TUB30
Availability: PreOrder

A passive 30-position (2 columns × 15) 15 mL conical tube carrier for the Tecan Freedom EVO / Genesis worktable. The tube layout is an LTS-original design, it seats on Tecan's published 25 mm pin grid, but the tube positions are ours, taught in EVOware as custom labware like any calibrated carrier. Price on request.

Request a quote / notify me Need a different tube size?

Made to order Printed, inspected and shipped within 3 business days

LabTechSurplus LTS-TEC-TUB30 30-position tube carrier, engineering render, isometric view — LTS-TEC-TUB30 · Engineering renderPhotos coming

Specification.

SKU	LTS-TEC-TUB30 · rev2
Compatible equipment	Tecan Freedom EVO / Genesis worktables, 25 mm pin grid
Bounding box	Assembled 149.5 × 313.0 × 33.0 mm (tol ±0.15), exceeds a single print bed, ships as Piece A 149.5 × 172.75 × 33.0 mm (16 bores) + Piece B 149.5 × 146.25 × 33.0 mm (14 bores)
Tube positions	30 (2 columns × 15), LTS design pitch 20.5 mm along Y, 25.0 mm column spacing in X, taught in EVOware as custom labware, not an OEM layout
Tube bore	Ø18.1 mm bore (0.6 mm drop-in clearance over a 17.5 mm OD 15 mL conical tube, e.g. Falcon 352096/97), 30 mm engagement depth, Ø6 mm drain under every bore
Pin interface	Obround through-slot 8.5 × 16.5 mm × 6, 2 columns × 3 rows on the 25 mm grid, row spacing 104.6 mm (front↔mid) / 125.8 mm (mid↔rear), placed to match the same published EVOware worktable positions used by the MTP family
Material	PETG (production); PLA used for the gated first-article prints only
Mass	≈212 g set (Piece A ≈120 g + Piece B ≈92 g)
What's in the box	Two keyed halves, 2× M3 heat-set inserts, 2× M3 clamp screws, one printed spec/ID card
Warranty	30-day fit guarantee · 12-month workmanship warranty

The four tube-layout numbers (pitch, column spacing, width, bore depth) are not published anywhere for a Tecan 15 mL passive carrier. LabTechSurplus originated them as our own parametric DFM decision, fit-tunable, built on Tecan's published pin-grid geometry. This is why the layout is taught per-install in EVOware rather than sold as a drop-in match to an existing Tecan definition.

Quality control.

Every unit is gated before it's approved to ship. This SKU's pipeline results, from the design record:

Full (reference): MESH PASS watertight, 149.50 × 313.00 × 33.00 mm; DIMS/VOLUME PASS 386,932.4 mm³; HOLE ×6 bores + ×4 pin slots sampled, all PASS; WALL PASS p5 = 2.55 mm (floor 2.00 mm)
Piece A: MESH/DIMS/VOLUME PASS 149.50 × 172.75 × 33.00 mm, 220,879.1 mm³; WALL PASS p5 = 2.53 mm; SLICE PASS
Piece B: MESH/DIMS/VOLUME PASS 149.50 × 146.25 × 33.00 mm, 164,205.9 mm³; WALL PASS p5 = 2.52 mm; SLICE PASS
Full-assembly slice is an expected fail, 313 mm exceeds the 256 mm print bed, which is why the part ships as two keyed halves

cLLD caveat

Polymer carrier. Capacitive liquid-level detection (cLLD) does not ground through this carrier; use fixed-height/taught positions or a conductive underlay.

FAQ.

Common questions about LTS-TEC-TUB30.

Will this fit my worktable position?

LTS-TEC-TUB30 fits a 30-position (2 × 15), 15 mL conical tube layout on a Tecan Freedom EVO / Genesis worktable's 25 mm pin grid. Before ordering, confirm your worktable position is taught (or can be taught) as custom labware in EVOware, this is an LTS-original tube layout, not a copy of an OEM tube carrier.

Is this SKU PLA or PETG?

Production units ship in PETG. PLA is only used for the gated first-article prints during development, never what ships to a customer.

What's the lead time?

This SKU is made to order, each unit is printed, inspected and shipped within 3 business days of your order or confirmed quote once your layout is taught, nothing is held in stock. Request a quote for current lead time to your location.

What if it doesn't fit, or fails?

Every part carries a 30-day fit guarantee and a 12-month workmanship warranty. If it doesn't seat on your worktable as specified, tell us within 30 days of delivery and we'll make it right; a manufacturing defect within 12 months gets replaced.

Can you take a PO, W-9, or tax-exempt order?

Yes. We accept purchase orders, provide a W-9 on request, and remove sales tax when you send your exemption certificate with the PO, see Procurement for the full process.

Is this a Tecan part?

No. This is an independent aftermarket replacement, designed from Tecan's own published worktable dimensions, not copied from an OEM part. LabTechSurplus is not affiliated with, endorsed by, or sponsored by Tecan Group; Tecan is named for compatibility only.

Request a quote.

Price on request until first-article bench testing lands. Made to order once your layout is confirmed. Printed, inspected and shipped within 3 business days. Tell us where it's headed and we'll follow up.