Home › Compatible Parts › LTS-TEC-MTP4
LTS-TEC-MTP4 · GRADE: LTS COMPATIBLE · REV r1
A 4-position, low-profile "flat family" SBS/ANSI-SLAS microplate carrier for Tecan Freedom EVO and Genesis worktables. Ships as two keyed halves, assembly takes under a minute. $145.95.
30-day fit guarantee · 12-month workmanship · Ships from California · Independent aftermarket, not affiliated with any OEM
| SKU | LTS-TEC-MTP4 · Rev r1 |
| Compatible equipment | Tecan Freedom EVO / Genesis worktables, 25 mm grid, 4-position flat layout (placed to match the published EVOware "MP 4Pos Flat" worktable positions) |
| Bounding box | Assembled 149.5 × 380.0 × 11.4 mm (tol ±0.15); ships as Piece A 149.5 × 194.25 × 11.4 mm + Piece B 149.5 × 189.75 × 11.4 mm (both under the 256 mm print-bed limit) |
| Plate seats | Four pockets, centres Y = −143.75 / −47.75 / +48.25 / +144.25 mm (pitch 96.0), seat centre X = −1.25 mm; pocket 128.06 × 85.78 mm per seat |
| Pin interface | Obround through-slot 8.5 × 16.5 mm × 6, columns X = −63.75 / +61.25 mm, rows Y = −91.4 / +13.2 / +139.0 mm (front/mid/rear) |
| Material | PETG (production); PLA used for the gated first-article prints only |
| Mass | Piece A ≈103 g, Piece B ≈101 g, assembled ≈204 g incl. hardware (PLA first-article slice, est.); production PETG estimated ≈209 g combined |
| What's in the box | Two keyed halves (Piece A: sites 1 & 2; Piece B: sites 3 & 4), 2× M3 heat-set inserts, 2× low-head M3 screws, one printed spec/ID card |
| Warranty | 30-day fit guarantee · 12-month workmanship warranty |
Every unit is gated before it's approved to ship. This SKU's pipeline results, from the design record:
Polymer carrier. Capacitive liquid-level detection (cLLD) does not ground through this carrier; use fixed-height/taught positions or a conductive underlay.
Common questions about LTS-TEC-MTP4.
LTS-TEC-MTP4 fits four flat positions in a row on a Tecan Freedom EVO / Genesis worktable's 25 mm pin grid, at the published front/mid/rear row spacing. Before ordering, confirm your worktable has four adjacent flush positions, not portrait or raised.
Production units ship in PETG. PLA is only used for the gated first-article prints during development, never what ships to a customer.
This SKU is made to order, each unit is printed, inspected and shipped within 3 business days of your order or confirmed quote, nothing is held in stock. Request a quote for current lead time to your location.
Every part carries a 30-day fit guarantee and a 12-month workmanship warranty. If it doesn't seat on your worktable as specified, tell us within 30 days of delivery and we'll make it right; a manufacturing defect within 12 months gets replaced.
Yes. We accept purchase orders, provide a W-9 on request, and remove sales tax when you send your exemption certificate with the PO, see Procurement for the full process.
No. This is an independent aftermarket replacement, designed from Tecan's own published worktable dimensions, not copied from an OEM part. LabTechSurplus is not affiliated with, endorsed by, or sponsored by Tecan Group; Tecan is named for compatibility only.
$145.95 · Made to order. Printed, inspected and shipped within 3 business days. Tell us where it's headed and we'll follow up with lead time and shipping.