2 Position Portrait Microplate Carrier, Compatible Replacement for Tecan Freedom EVO

Name: LabTechSurplus LTS-TEC-MTP2P 2-Position Portrait Microplate Carrier
Brand: LabTechSurplus
SKU: LTS-TEC-MTP2P
Price: 180.95 USD
Availability: PreOrder

A 2-position portrait, raised-deck SBS/ANSI-SLAS microplate carrier for Tecan Freedom EVO and Genesis worktables. The deck sits on an open rib frame at a 62.5 mm reference height above the worktable, taller than our low-profile carriers, built for layouts that need the plate raised off the deck surface. Ships as two keyed halves, glue-joined. $180.95.

Request a quote / notify me Need a different layout?

Made to order Printed, inspected and shipped within 3 business days

LabTechSurplus LTS-TEC-MTP2P 2-position portrait microplate carrier, engineering render, isometric view — LTS-TEC-MTP2P · Engineering renderPhotos coming

Specification.

SKU	LTS-TEC-MTP2P · Rev r1.1
Compatible equipment	Tecan Freedom EVO / Genesis worktables, 25 mm grid, 2-position portrait layout, raised open-frame body, 62.5 mm deck reference (placed to match the published EVOware "MP 2Pos Portrait" worktable positions)
Bounding box	Assembled 149.0 × 316.0 × 67.0 mm (tol ±0.15); ships as Piece A 149.0 × 178.0 × 67.0 mm + Piece B 149.0 × 150.5 × 67.0 mm (both under the 256 mm print-bed limit)
Plate seats	Two portrait pockets, centres X = +15.75 mm, Y = −60.2 / +77.8 mm (pitch 138.0); pocket 85.78 × 128.06 mm per seat
Pin interface	Obround through-slot 8.5 × 16.5 mm × 6, columns X = −62.5 / +62.5 mm, rows Y = −97.1 / +7.5 / +133.3 mm (front/mid/rear)
Material	PETG (production); PLA used for the gated first-article prints only
Mass	Piece A ≈273 g, Piece B ≈235 g, assembled ≈508 g (PLA first-article slice, est.); production PETG estimated ≈520 g combined
What's in the box	Two keyed halves (Piece A: front seat, front pin row, both mid-row pin slots on integrated foot tabs, joint tenon; Piece B: rear seat, rear pin row, matching foot notches, joint mortise), one printed spec/ID card. Halves join with a tenon/mortise key and a glue bond; adhesive not included
Warranty	30-day fit guarantee · 12-month workmanship warranty

Quality control.

Every unit is gated before it's approved to ship. This SKU's pipeline results, from the design record:

Full (reference): MESH/DIMS/VOLUME PASS 149.00 × 316.00 × 67.00 mm, 798,001.5 mm³; HOLE ×6 PASS Ø8.50; WALL PASS p5 = 3.00 mm
Piece A: MESH/DIMS/VOLUME PASS 149.00 × 178.00 × 67.00 mm, 423,901.8 mm³; HOLE ×4 PASS Ø8.50; WALL PASS p5 = 3.00 mm; SLICE PASS
Piece B: MESH/DIMS/VOLUME PASS 149.00 × 150.50 × 67.00 mm, 375,624.5 mm³; HOLE ×2 PASS Ø8.50; WALL PASS p5 = 3.00 mm; SLICE PASS

cLLD caveat

Polymer carrier. Capacitive liquid-level detection (cLLD) does not ground through this carrier; use fixed-height/taught positions or a conductive underlay.

FAQ.

Common questions about LTS-TEC-MTP2P.

Will this fit my worktable position?

LTS-TEC-MTP2P fits two positions in portrait orientation on a raised, open-rib deck about 62.5 mm above the worktable. Before ordering, confirm your positions are portrait (not side-by-side) and sit raised off the deck, not flush.

Is this SKU PLA or PETG?

Production units ship in PETG. PLA is only used for the gated first-article prints during development, never what ships to a customer.

What's the lead time?

This SKU is made to order, each unit is printed, inspected and shipped within 3 business days of your order or confirmed quote, nothing is held in stock. Request a quote for current lead time to your location.

What if it doesn't fit, or fails?

Every part carries a 30-day fit guarantee and a 12-month workmanship warranty. If it doesn't seat on your worktable as specified, tell us within 30 days of delivery and we'll make it right; a manufacturing defect within 12 months gets replaced.

Can you take a PO, W-9, or tax-exempt order?

Yes. We accept purchase orders, provide a W-9 on request, and remove sales tax when you send your exemption certificate with the PO, see Procurement for the full process.

Is this a Tecan part?

No. This is an independent aftermarket replacement, designed from Tecan's own published worktable dimensions, not copied from an OEM part. LabTechSurplus is not affiliated with, endorsed by, or sponsored by Tecan Group; Tecan is named for compatibility only.

Request a quote.

$180.95 · Made to order. Printed, inspected and shipped within 3 business days. Tell us where it's headed and we'll follow up with lead time and shipping.