Home › Compatible Parts › LTS-TEC-MTP1
LTS-TEC-MTP1 · GRADE: LTS COMPATIBLE · REV r1
A single-position SBS/ANSI-SLAS microplate carrier for Tecan Freedom EVO and Genesis grid-based worktables. Drop-in plate seat, two through-slots on the underside keyed to the worktable's 25 mm pin grid. $120.95.
30-day fit guarantee · 12-month workmanship · Ships from California · Independent aftermarket, not affiliated with any OEM
| SKU | LTS-TEC-MTP1 · Rev r1 |
| Compatible equipment | Tecan Freedom EVO / Genesis worktables, 25 mm pin grid, 1-position layout |
| Bounding box | 149.5 × 94.0 × 10.5 mm (tol ±0.15); bench-measured first article 149.35 × 94.04 × 10.5 mm |
| Plate seat | Pocket 128.06 × 85.78 mm (SLAS footprint 127.76 × 85.48 + 0.30 mm clearance); measured plate play <0.3 mm |
| Pin interface | Obround through-slot 8.5 × 16.5 mm × 2, one row, 100 mm apart on the 25 mm grid |
| Material | PETG (production); PLA used for the gated first-article print only |
| Mass | ≈49 g (PETG, estimated) |
| What's in the box | One carrier (single-piece print, no fasteners), one printed spec/ID card |
| Warranty | 30-day fit guarantee · 12-month workmanship warranty |
Every unit is gated before it's approved to ship. This SKU's pipeline results, from the design record:
Polymer carrier. Capacitive liquid-level detection (cLLD) does not ground through this carrier; use fixed-height/taught positions or a conductive underlay.
Common questions about LTS-TEC-MTP1.
LTS-TEC-MTP1 fits a single flat position on a Tecan Freedom EVO / Genesis worktable's 25 mm pin grid. Before ordering, confirm your position is a single flush SBS/ANSI-SLAS seat (not raised or PosID) and that two pin slots line up in one row underneath.
Production units ship in PETG. PLA is only used for the gated first-article prints during development, never what ships to a customer.
This SKU is made to order, each unit is printed, inspected and shipped within 3 business days of your order or confirmed quote, nothing is held in stock. Request a quote for current lead time to your location.
Every part carries a 30-day fit guarantee and a 12-month workmanship warranty. If it doesn't seat on your worktable as specified, tell us within 30 days of delivery and we'll make it right; a manufacturing defect within 12 months gets replaced.
Yes. We accept purchase orders, provide a W-9 on request, and remove sales tax when you send your exemption certificate with the PO, see Procurement for the full process.
No. This is an independent aftermarket replacement, designed from Tecan's own published worktable dimensions, not copied from an OEM part. LabTechSurplus is not affiliated with, endorsed by, or sponsored by Tecan Group; Tecan is named for compatibility only.
$120.95 · Made to order. Printed, inspected and shipped within 3 business days. Tell us where it's headed and we'll follow up with lead time and shipping.